We hope you have a Joyful Christmas and a Prosperous 2018!

ws_Blue_Table_Christmas_Ornament_852x480

Our last shipping date for despatching orders prior to the Christmas break will be 20th December, with deliveries resuming on the 4th January 2018.

Everyone at Braude would like to thank our customers for your support in 2017.

We hope you have a Wonderful Christmas and wish you a Prosperous and Happy 2018 and look forward to supplying you with all your heating and cooling needs for corrosive liquids.

To find out more…

Visit: www.braude.co.uk

Call: +44 (0) 1252 876123

Email sales@ebraude.com

Advertisements

You wouldn’t let this happen to your car, so why risk your tanks freezing over winter..?

Frozen Cars

Myth: Burst pipes is only a Cold Climate problem; it’s a common misbelief that frozen pipes are only an issue for those in typically cold climates.

Fact: Because pipes may not be properly insulated against low temperatures, situations that are actually more vulnerable to frozen pipes are those in typically warmer climates.

Imagine the cost and delay if you were to come back to a burst pipe in your building. Don’t let an unexpected freeze adversely affect your business. These easy tips may help prevent a catastrophic pipe burst…

1: Keep the Heat On
Make sure that the heat is kept on at your property over weekends and holidays. It may seem extravagant to keep the heat on when the building is empty, but burst pipes can cause a lot of water damage to property and equipment.

2: Allow a tap to Drip
Allowing a tap to be open like this will relieve pressure in the system. If a pipe freezes, it is actually the pressure that is created between the blockage and the tap that will cause the pipe to burst. Keeping it open will prevent this pressure from building up and thus, keep the pipe from bursting.

3: Keep Interior Doors Open
Pipes are often located in cabinets. When the temperatures drop, it is a good idea to keep these cabinet doors open so that the heat from the rest of the building can keep the pipes warm as well. You should also keep all interior doors open so that the heat can flow throughout the airspace.

4: Seal Up Cracks and Holes
Caulk any holes or cracks that exist near pipes on both interior and exterior walls; doing so can help keep the cold air out and the warm air in.

5: Add Extra Insulation
Pipes that are located in areas that do not have proper insulation, such as basements or attics, may need extra insulation to keep from freezing. Pipes in basements or attics are not the only ones that may not be properly insulated from the cold. If you have had a problem with pipes freezing anywhere in your building, extra insulation could be the cure.  Additional insulation can also be added to walls and ceilings to keep the pipes warm.

6859 heater OTP controller_Sml-512px
Polaris Popular heater fitted with HPD

6: Fit & maintain Braude Polaris Popular heaters in your tanks
Our Polaris Popular heaters are manufactured from high integrity polymers to give the best protection against deterioration and high performance in very corrosive solutions. Available in power ratings from 0.5kW to 18kW, for single phase or three phase power supplies. Accessories available for use with the heater include the Hazard Protection Device (HPD) and the Thermaster Thermostatic controller. Braude quality and safety standards are well established and built into the Polaris Popular heater range.

7: Fit a Braude Tankmaster controller to your heaters
The Braude Tankmaster provides a display of the set point as well as the temperature of the bath. Braude TankmasterFeatures include…

  • Secondary set point either from a single or an ancillary probe.
  • Drop back facility to enable a lower setpoint temperature to be selected, which is ideal to allow maintenance of a tank over a weekend.
  • Operating band go / no go indication for critical process operation
  • High / high and low / low liquid level settings
  • No external buttons or knobs so preventing the accidental alteration of the setting
  • All features are easily programmable by the end user, or can be preset in the factory prior to despatch

All Braude products are backed up by Braude’s experience of many years manufacturing and supplying equipment for arduous environments and is provided with a full 12 month guarantee.

You can rest assured by using the Braude range of heaters and controllers, you will have a Happy Christmas and Peaceful New Year!

To find out more call our sales team on +44 (0) 1252 876123

or send us an email sales@ebraude.com

Christmas & New Year
Our last shipping date for despatching orders prior to the Christmas break will be 20th-December, with deliveries resuming on the 4th January 2018.

Keep your liquid levels under control this Christmas & New Year…

drunksanta

Without sensitive and carefully designed monitoring equipment even the most robust and well-built industrial machinery or processes can go catastrophically awry.

Braude have a range of products to help you ensure your tanks are working safely and efficiently over the Christmas and New Year break…

The Braude Tankmaster MP is a combined temperature and level controller. It is supplied complete with non-corrodable temperature and level sensors for use in the corrosive solutions found throughout the Finishing industry.

The controller is designed for surface mounting and sealed to IP65 so it is suitable for use close to the point of use providing an easily read display for the operator of tank conditions. It provides a display of the set point as well as the temperature of the bath and has no external buttons or knobs so preventing the accidental alteration of the setting.

Braude Controllers
Braude Thankmaster, Levelmaster & Thermaster with temperature and level probes

Features include:

  • Secondary set point either from a single or an ancillary probe.
  • Drop back facility to enable a lower set point temperature to be selected, which is ideal to allow maintenance of a tank over a weekend.
  • Can be set by the end user or alternatively can be preset in the factory prior to despatch

Thermaster and Levelmaster controllers are also available from Braude and all probes are interchangeable with the Tankmaster.

 

 

Themaster TS
Thermaster TS temperature sender

Thermaster TS -Plating and process tanks need reliable control and the Braude Thermaster TS has been produced specifically for those applications. The Thermaster TS is perfect for sending data to a PLC which can be set programmed to monitor and control the temperature of the process tank. It can easily be linked to a multiple tank system and monitored from one central, often remote, location.

frogspawndiag
Frogspawn Thermal Insulation Spheres layout diagram

Frogspawn Thermal Insulation Spheres form a floating blanket ideal for use on the top of open process tanks, giving a physical cover of 91% to provide a continuous insulating layer. The air inside the hollow spheres and the air pockets between them provide insulation but still allows workloads like jigs and components to easily pass through the layer.

Two main advantages are:

  • Savings in heat loss of up to 75%, depending on temperature conditions
  • Savings of up to 90%, reducing corrosive effects on structure of plant and buildings.

All products are backed up by Braude’s experience of many years manufacturing and supplying equipment for arduous environments and are provided with a full 12 month guarantee.

You can rest assured by using the Braude range of heaters and controllers, you will have a Happy Christmas and Peaceful New Year!

To find out more call our sales team on +44 (0) 1252 876123

or send us an email sales@ebraude.com

Christmas & New Year
Our last shipping date for despatching orders prior to the Christmas break will be 20th-December, with deliveries resuming on the 4th January 2018.